Article source: www.woodheat.org
Wood Energy Economics and Heating Security
Comparing Firewood to Conventional Heating Fuels
Fuelwood is unlike any other mainstream heating fuel, in that users are engaged physically and mentally in its consumption, and for many, in its production as well. Users of oil, gas and electric heating are typically involved only in paying energy bills and adjusting thermostats. As a result, any cost comparison of wood with other fuels is likely to be inaccurate, if not misleading, because it cannot account for either the labour costs or the intangible benefits of wood heating.
Householders considering a switch to wood heating would find it useful to know how much money they might save compared to the use of conventional fuels, in the same way that other major purchases are evaluated. The problem with this approach is that the cost-benefit analysis of wood heating is not easily reduced to a simple matter of money. Considering the rising prices of conventional fuels, it is probably accurate to say that households located outside major urban centres where there is significant forest cover could save money using firewood on a strictly heat-energy-per-dollar basis. But how can the other less tangible costs be evaluated? These costs might include:
- the space required to store a winter’s supply of firewood outside the house and space inside the house for a few day’s supply
- the physical strength and stamina required to split, move and stack firewood
- the time consumed in managing the fuel supply, tending the fire and dealing with regular maintenance tasks like ash removal
- the impact of the inevitable ‘mess’ of wood chips, bark and wood ash on the time consumed by household cleaning
The intangible benefits are equally difficult to evaluate in monetary terms.
- the satisfaction one feels in having mastered home heating largely by personal labour and ingenuity
- the sense of security both in terms of energy price stability and in the ability to remain comfortable in the home during electrical power interruptions
- the beauty and ambience created by a fire burning behind clear glass doors
- the special kind of warmth given off by a wood stove located in the main living area (this may be debatable in terms of physics, but it is mentioned by most users of wood fuel as an important benefit)
Several online sites offer fuel cost comparison methods. The calculations are fairly complex, accounting for local fuel pricing, housing type, climate zone, fuel type, appliance type and efficiency. However, a good indication of the imprecision of these calculation methods is that only whole-house heating to an even temperature throughout can be considered. This type of calculation cannot accommodate a wood stove used as a partial or complete heating replacement for a central furnace using conventional fuel. Compared to central heating, the use of a wood stove for space heating, especially if it is located in the main living area, can mean a reduction in heat energy needed by up to 25 percent, regardless of the cost of either fuel.
How Wood Heating Strengthens the Local Economy
Let’s look at some real-world examples of how people save money by heating with wood. Some families buy their firewood already split so their work only involves stacking it to dry. They might spend $250 for each cord (4’x4’x8’), the equivalent of almost $440 in fuel oil at $2.75 a gallon. That family’s savings wouldn’t be large, but they would gain all the tangible and intangible benefits of wood heating.
Small-scale harvesting and processing equipmentSomeone working in his woodlot, harvesting trees and processing them into firewood can save most of the cost of heating using other methods. For him the cost of a winter’s firewood is two week’s work and a few gallons of gas for the saw, splitter and pickup truck. Harvesting and processing the household’s heating fuel can save two or three thousand dollars every year.
What if dozens of households in a small town decided to save money by heating with wood instead of oil? Each of the twenty households would have a few hundred to a few thousands of dollars more to spend around town this year. Every dollar saved through wood heating is another dollar of spending that strengthens the local economy.
Rural areas tend to have large ‘trade deficits’ on consumer goods and most commodities. Their ‘exports’ are usually based on their natural resources such as mining, agricultural and forest products. Revenue from external sources is commonly in the form of tourism and recreation expenditures by non-residents. Overall, as population, industry and political decision-making concentrates in large cities, rural areas have not fared well economically.
A household that produces its own fuelwood supply saves $2,000 or more each year, an amount that can be used to reduce expenses in a household of marginal income, or that can be spent on other goods and services like home improvements. This household trades its own labour for big savings in household operating expenses.
A woodlot owner who produces and sells firewood provides employment and income to the area. If that same producer practices effective management, the quality and value of the woodlot are enhanced at the same time. When a local household buys its winter fuel supply from a neighbour, that transaction has a multiplying effect by keeping the money circulating within the community, increasing local incomes and job creation.
Local economic activity, including jobs and incomes, is increased through the use of fuelwood as a substitute for fuels purchased from outside the community. In a time of uncertainty about the future price and security of supply of conventional energy sources, fuelwood provides some price stability for residents of rural areas, as well as a sense of security because, if necessary, each household could produce its own fuel supply with a relatively small outlay of cash.
Article source: www.woodheat.org
Energy Return on Energy Invested
Looking at the energy cost of energy
Economists focus on the money cost of energy, but the energy costs of energy can provide better insights into environmental costs and the underlying reasons for the money cost. For this reason, the energy return on energy invested (EROEI) should be included in any appraisal of the quality, impacts and appropriateness of various energy sources. Here is a sample EROEI analysis for fuelwood compared to other energy sources. Note that the value of labour is not included in the calculation.
- hardwood fuel example: 24 million btu per cord of sugar maple
- 1 gallon of gasoline: 115,000 btu
- average round trip for fuel delivery: 50 miles
- fuel consumption of pick up truck: 15 mpg
- two round trips per cord = 6.7 gallons
- chainsaw fuel per cord: 0.5 gallon
- log splitter fuel per cord: 1 gallon
Total fossil fuel consumption: 8.2 gallons/cord x 115,000 = 943,000 btu
Calculation: Energy content per cord: 24 M btu divided by fossil fuel input: 943,000 btu.
Energy return on energy invested: 25:1
An EROEI of 25:1 may not be worst case for fuelwood, but it is close for rural areas. Harvesting from their own woodlot, some people probably produce firewood at an EROEI of 30 to 40:1.
For comparison, back in the heyday of oil, when discoveries were peaking and consumption was just ramping up, one barrel invested would yield about 100 barrels for sale, a cheap energy bonanza if there ever was one. Today, gushers are a thing of the past, most of the biggest oil fields are in decline and the ‘new’ oil fields are tiny and found under oceans. The EROEI of oil and gas has now fallen to 10:1 to 20:1, depending on age, type and location of the field. So-called unconventional oil such as the bitumen extracted from the Canadian tar sands has an EROEI of as low as 1.5:1 to a high of 4:1, depending on how the calculation is done and who does the calculating.
The green bars are the minimum EROEI and the baige parts are the observed range.
The chart at right was developed by Professor Charles Hall and his colleague John Day. Note that firewood is asigned an EROEI of around 30:1, which is a similar result to the analysis done for this paper.
Wood, in the form of natural firewood, compares favorably with other fuels regarding the amount of net energy realized after processing and transportation. This bodes well for a degree of price stability for fuelwood in the future. Price stability is not likely for the fossil fuels because as the easily accessible deposits are consumed the EROEI rises dramatically, as does the retail price.
What if everyone heated with wood?
This beautiful graphic was created for RSF-ICC, a fireplace and chimney company. Used with permission.Critics of wood heating like to say that if everyone decided to heat with wood, the air would be polluted and every forest in the country would be mowed down to produce firewood. Maybe, but the whole idea is pretty silly, considering that wood is a lousy urban energy source and is best used locally. Even the most ardent defenders of wood heating would never promote it as a universal energy source.
Large parts of the country are relatively thinly populated and have highly productive forests. These are the regions where wood heating makes sense. Foresters have said that wood heating could easily double or more in many regions without putting undue stress on the forest resource. Our forests do need to be managed sustainably, but the methods are well known and can be summarized in a single sentence: Uneven-aged selective harvesting, thinning of dense stands and removal of poorer quality trees, while leaving seed trees of all present species and ages, and some standing dead trees to provide wildlife habitat.
Many woodlots in farm country can offer a striking model of sustainable forestry. The careful work by generations of farmers and other woodlot owners, visible in healthy, productive woodlots that have provided generations of owners with their heating fuel and other products, provides the stewardship model that others can follow.
And while many woodlot owners understand and practice sustainable forest management, others exploit the resource for short-term profit. Unfortunately, some farmers have maximized short term profit by clear cutting their woodlots and converting the land to cash crop production. Some companies and individuals have made a practice of buying large parcels of unused forest land, stripping them of all the commercial trees and then reselling the depleted parcels. These profiteers do meet the definition of woodlot owners, but they do not maintain ties to the lands they buy and sell.
A healthy, well-managed woodlot can provide firewood and other products indefinately.It has long been said that a healthy, well-managed woodlot can yield half a cord of wood per acre per year forever – one full cord being a pile eight feet long, four feet wide and four feet high – and that a ten acre woodlot could sustainably produce enough firewood each year to heat a house. Although that guideline is old and not very precise, it still holds true. In fact, it takes a lot less than five cords of wood, and therefore less than a ten acre woodlot, to heat a new energy-efficient house using a modern wood stove. There is some evidence that carefully designed and built houses can be heated with as little as 1.5 cords of firewood.
Despite its considerable advantages, fuelwood is not a good solution for all households to the problems of high home heating costs and global warming. Fuelwood is not a suitable energy source in all locations, such as densely-populated urban areas, because its air emissions tend to be higher than other options, and the air is already burdened with pollution from industry and transportation. A winter’s supply of wood takes up a lot of space, and the price of firewood in urban areas is normally too high to achieve savings. Successful heating with wood also requires a level of physical fitness and the learning of a special set of skills. Clearly, wood heating is not for everyone.
Article source: www.woodheat.org
Advanced Wood Burners Cut the Smoke
The new wood burning technology found in EPA certified stoves goes a long way toward solving all three wood smoke problems: airshed contamination, nuisance wood smoke and indoor air pollution. These advanced stoves, inserts, fireplaces and furnaces cut wood smoke by up to ninety percent compared to older so-called ‘airtight’ stoves, and also spill less smoke into the indoor air because fires don’t tend to smoulder in them, the condition that most contributes to smoky indoor air.
Smoke emissions from older conventional wood stoves average at least 25 grams per hour of operation, while the emissions from older wood-fired outdoor boilers range from 50 g/h to well over 100 g/h. In contrast, the EPA regulation limits emissions of certified wood stoves to no more than 7.5 g/h. However, since the regulation was first established in 1988, the average emissions of certified stoves have declined steadily due to advances in technology and competition among manufacturers. Today, most current wood stove models emit only 2 to 4 g/h.
Although the EPA emissions limits are stated as solid particles (particulates) collected on filters, other detailed testing has shown that the emission of the scary-sounding polycyclic aromatic hydrocarbons like fluorene and benzo (a) pyrene, as well as volatile organic compounds like benzene and xylene are all far lower in the exhaust from advanced wood heating equipment than from old style wood burners.
Despite what some anti-wood heating activists have claimed, the technology is effective in reducing pollution. The reduction in smoke emissions has been a significant technological breakthrough in wood burning and is noticeable at the top of the chimney where no visible smoke is seen.
Advanced equipment is more efficient too
Just as noticeable to users, however, is the increase in efficiency that results from burning and not wasting the energy-rich smoke. Conventional wood stoves range in efficiency from a low of about 35 percent for a cast iron box stove or furnace to a high of as much as 55 percent for a 1970s era ‘airtight’. Most older outdoor boilers are less than 50% efficient. In contrast, EPA certified wood stoves average around 70 percent and none are less than 60 percent efficient. The new breed of emissions certified outdoor boilers are also much more efficient.
The difference in efficiency between conventional wood burning equipment and the advanced low-emission models is so significant that users can immediately see the difference when they upgrade and begin using a new stove. The reduction in fuelwood consumption by up to one-third is significant for each household that uses the new technology, but it also has the potential to increase the number of houses that can be heated based on the sustainable harvesting of a given area of forested land. Another significant factor that reduces a wood-heated household’s impact on the forest resource is the lower heat energy requirements of modern housing. Together, the increase in wood burning appliance efficiency and improvements in housing energy conservation can roughly double the number of dwellings that can be heated by the yield from a given woodlot compared to just 25 years ago.
An outdoor boiler firing up.Community-wide smoke problems are uncommon in areas where level topography does not produce the same number or severity of winter inversions that trap smoke close to the ground. While community level smoke problems are relatively rare, nuisance smoke caused by thoughtless neighbours has been identified as a problem in dozens of towns. One technology in particular has been the focus of many complaints. Outdoor wood-fired boilers (OWB), which look like metal garden sheds and send hot water to one or more buildings through buried pipes, have become notorious for the dense smoke they produce. Small towns have enacted bylaws restricting the installation of outdoor boilers by either banning them from residential areas or placing limits on their proximity to property lines.
The source of the problem is that central heating furnaces and boilers, including OWBs, were exempt from the original EPA emission rules back in 1988 on the basis that there were too few of them to bother regulating. Well, that was then. Now OWBs are very popular and as a result a new smoke emissions test for OWBs has been approved and certified models are now on the market. On paper the new breed of OWBs look much better than the older, smokier versions. Time will tell if they are clean burning enough to satisfy regulators and reduce public complaints.
Article source: www.woodheat.org
An Essential Resource
By any measure, wood is an important residential energy resource, especially outside large urban areas. Over 10 million US households, just under 10 per cent of the total, use wood as their main heating fuel or to supplement other heating fuels. Over 25 per cent of Canadian households burn wood.
Well-stacked piles of firewood are a comforting sight.A drive through small towns and down country roads in forested regions confirms that fuelwood is a significant energy resource. The long lines of piled firewood standing in yards serve as proof. Every winter the wood is cut from woodlots and every spring it is split and stacked to dry in the summer sun. In the fall it is moved to the house and stacked again, and in winter it keeps families cosy warm. It is a seasonal ritual that has recurred year in and year out for decades, for generations.
Firewood for home heating is an indigenous, renewable energy resource that helps families stretch their household budgets and strengthen their local economies. And yet an increasing number of vocal activists are clamouring to have wood burning banned from their communities because of air pollution, and even some environmentalists warn against the increased use of firewood fearing negative impacts on our forests.
A balanced assessment of firewood for home heating is long overdue. This paper explores how wood burning contributes to the prosperity of rural communities, the health and well-being of their inhabitants, and to the environmental sustainability of our society. It also tackles the problems of wood smoke pollution and forest resource impacts.
Wood smoke pollution is the most serious knock against wood heating, so it is best to deal with it first.
The problem of smoke pollution from residential wood burning has been debated since the resurgence of wood as a fuel after the oil crisis of the 1970s. Because it contains toxic chemicals and known carcinogens, wood smoke is unhealthy to breathe in high concentrations and even in low concentrations can be harmful to children, the elderly and those with lung diseases or allergies. There are three aspects of wood smoke pollution that can be considered: nuisance smoke caused by a neighbor, airshed contamination caused when many households make too much smoke in a confined area like a river valley, and indoor air pollution caused when a wood burning appliance spills smoke into the house.
Firewood was seen as a renewable resource, but now it is linked to pollution.
In the aftermath of the first oil crisis in the late 1970s, governments supported the public’s return to wood as a home heating fuel. At the time it was seen as one strategy to reduce dependence on expensive imported oil. However, a gradual policy shift has occurred since then. Positive statements about firewood’s status as a renewable energy source and its role in reducing net greenhouse gas emissions are less common and more qualified in government documents than previously. To the extent that governments deal at all with the issue of wood heating, the concern tends to be more with pollution abatement than with encouragement.
Statements by both government and nongovernmental health agencies frequently include lengthy statements about the hazardous chemical constituents of wood smoke. They offer lists of compounds like polycyclic aromatic hydrocarbons, dioxins and furans and acrolein. The use of intimidating technical terms without offering contextual information makes these detailed statements quite beyond the ability of the average reader to comprehend or interpret. For example, context could be provided in the form of a list of chemicals emitted by a city bus or a backyard barbecue, which are similarly odious sounding. Government personnel insist that statements listing the chemicals found in wood smoke are simply intended to inform the public, but it might equally be said that this communications tactic reveals an underlying intention to dissuade the public from using wood fuel, especially considering that no other energy source receives this kind of treatment in public information.
It is not the intention here to minimize the environmental impacts of wood heating or attempt to deflect concerns by highlighting pollution from other energy sources. But a balanced assessment of benefits and risks is called for when any energy source is evaluated or compared to other sources, especially by government agencies. Too often, those who have concerns about the wisdom of wood heating fail to understand or communicate that all energy sources, including renewables like wind and solar, have impacts on the environment. To single out one energy source for condemnation without providing supporting evidence or contextual information is unhelpful and unlikely to sway a justifiably sceptical public.
The haze of wood smoke across a highway in the morningThe problem of wood smoke from residential heating is serious in some places and under some conditions, and it is important that the public understand the risks and the ways to minimize them. The three dimensions of wood smoke pollution – airshed contamination, nuisance neighbours, and indoor air pollution – should be addressed through public information and, where necessary, regulation. To be successful in changing minds and behaviours, any government action should be developed in full recognition that people who heat with wood tend to be sceptical of experts or governments meddling with their personal wood heating practices.
Up next, part 3: Advanced burners and equipment.
Article source: www.woodheat.org
What makes wood heating different from all the other options?
Judged by coverage in policy discussions about our energy future, wood heating is virtually nonexistent. Most politicians don’t debate its merits or plan for its strategic use. The one area in which wood burning does attract attention is the problem of air pollution. As a result, wood burning has become most often identified as a problem to be solved rather than as an opportunity to be harvested. The one thing that almost no governments do is encourage householders to heat with wood. Fuelwood is the only renewable energy resource that most governments don’t seem comfortable with.
The low profile of wood heating in energy policy discussions and in the media reflects the fact that policy – even rural policy – is developed in big cites, and that the large media outlets are all urban in location and outlook. That and the fact that no large corporations are involved in wood heating and therefore no high-priced lobbyists or special interest groups prowl the halls of legislatures pleading the case of wood burning. So, despite the fact that millions of families burn wood at home, its role as an energy source rarely appears on government and media radar.
The refining of wood fuel is often done manually with hand tools.In a world of touch-screen convenience, pocket-sized computers, and automatic climate-controlled environments, wood heating is in every way rough, basic and steadfastly hands-on. People who heat with wood seem out of step with the modern world swirling around them. Have wood burners and those who labour to supply them with fuel slipped through a crack in the cozy consensus of modernity? Or are they onto something meaningful that has been missed by the mainstream?
The producers and consumers of fuelwood are engaged in an activity that reduces net greenhouse gas emissions while others merely fret about global warming. The fuelwood fraternity use a renewable energy resource, taking pressure off dwindling supplies of ever-pricier and scarce fossil fuels. Buyers of fuelwood create jobs close to home and strengthen their local communities. They know more about the cause-and-effect relationships of energy production and consumption than those who simply pay utility bills. The story of wood heating early in the twenty-first century is about average families making decisions based on how they see their future unfolding.
Heating with wood is about a lot more than home heating. It is a tangible expression of self-reliance, of the courage to buck the trends and to resist the appeal of sedentary, push-button convenience. Heating with wood reinforces links to the land and is a willing submission to the cycle of the seasons. It provides stability and security in a turbulent world.
To its owner, the woodlot is a living community in constant evolution, while to the urban observer it may be seen as a museum in which the removal of a tree exhibit renders it diminished. The woodlot owner watches its quality improve over the years, even as it yields products and creates employment. The owner’s household earns part of its income by being a fuel supplier to the neighbours. It is a gentle way to produce energy compared to mountain top removal coal mining and nuclear reactors.
Fuelwood is the ultimate populist energy resource, the most easily accessed and affordable of all renewable energies. The major environmental impact of wood heating is visible for all to see in the form of smoke emissions, making everyone who uses it instantly accountable for their actions. The families that heat with wood and those that supply them with fuel do so privately, without fanfare or acknowledgement. It seems they wouldn’t want it any other way. Heating with wood is its own reward. This is a private activity in which virtually everyone involved is content to remain anonymous, quietly keeping their families warm through their own labour and ingenuity.
But with so few individuals and groups speaking up to defend the responsible use of wood fuel, the families that depend upon it may soon be faced with unreasonable restrictions. Those who want to see wood heating banned are gaining influence and more governments are treating wood heating as a pollution problem and not as a renewable energy resource that needs to be improved.
Up next week: AN ESSENTIAL RESOURCE & SMOKE EMISSIONS
Yes, although it is not a common problem.
Properly seasoned firewood still has a fair amount of water in it, say 15 to 20 of its weight. That water acts like a regulator of the combustion process along with a few other factors like piece size, load configuration and combustion air supply.
The higher the fuel moisture, the slower the wood breaks down when heated because of all the heat energy soaked up in vaporizing the water out of the wood.
Conversely, the dryer the wood, the more quickly it breaks down when heated. By breaking down, I mean the vaporization of the volatile components of the wood; that is to say, it smokes. The dryer the wood, the more dense is the smoke at a given heat input rate.
Since wood smoke is fuel, we want to burn it as completely as possible and that means mixing with adequate oxygen in the combustion air. The problem is that a firebox load of very dry wood produces far more smoke than the air supplies of stoves are designed to provide. Besides, even if you could supply enough air, you would produce an inferno that would howl in the stove and make everyone in the house nervous. Fires that intense can seriously damage the stove’s innards. Wood that is very dry produces a fire that is hard to control without making a lot of smoke.
Kiln-dried wood is down around 10 percent moisture. Depending on climate and conditions of storage, normal firewood won’t dry down to kiln-dried moisture because of normal outdoor humidity. For example, I’ve never measured wood below about 14 percent in my firewood supply. But I suppose that firewood could get very dry by natural seasoning in desert conditions. Or firewood stored in old barns, which are like kilns in hot summer weather.
The right band of firewood moisture is between 15 and 20%. When you get much over 20% you start to see symptoms of sluggish ignition and the inability to turn down the air without extinguishing the flames. Towards 30% the wood sizzles and fires are very sluggish and it is hard to get a clean burn until the wood is almost to the charcoal stage. Above 30% water bubbles from the end grain when the wood is heated and it is very hard to burn at all. Species like poplar/aspen, which have very high native moisture content are virtually non-combustible when not adequately seasoned.
The main difference between EPA low-emission certified stoves and conventional stoves is that you can turn down EPA stoves for a long burn without extinguishing the flames. That is, they are better at producing a clean, controlled fire. But they are designed for wood that has a moisture content of twenty percent plus or minus one or two percent. Once you go far outside this band, their emission rate goes up. So even the best wood stove’s performance will suffer if the wood is not in the right moisture range.
If you have some very dry firewood, like kiln-dried cut offs or old wood stored in a hot place, mix it with regular firewood to raise the moisture content of a full load.
Feel good about heating with wood
There may be those who mistakenly think that wood is an old fuel on the way out. But some traditions are worth maintaining. Like close family bonds, a healthy community, and the rewards of hard work. Just because wood is a traditional fuel does not mean it should go out of fashion. Wood is a natural fuel, and by using it, you stay in touch with the earth’s natural cycles. You also gain an awareness of the environmental impacts of your energy use.
When you buy firewood, the money you spend does not go to a large utility outside your community, region or even province. It tends to stay close by, circulating within your community and strengthening the local economy.
And there are few things more satisfying than building a natural wood fire on your hearth, then sitting back to delight in its beauty and soak up its warmth. You can feel good about heating with wood in several different ways.
Think of firewood as solar energy stored in trees.
Yes, wood heating is environmentally appropriate
Did you know that by heating your house with wood or burning wood in your fireplace for enjoyment, you are taking a stand in favor of the environment? It’s true, heating your home with wood does not contribute to the greenhouse effect the way fossil fuels like oil, gas and coal do. When oil, gas and coal are burned, carbon that has been buried within the earth for tens of thousands of years is released in the form of carbon dioxide, a by-product of combustion. The result is an increase in the atmospheric concentration of carbon dioxide, the main cause of the greenhouse effect.
Although carbon makes up about half the weight of firewood and is released as carbon dioxide when the wood is burned, it is part of a natural cycle. A tree absorbs carbon dioxide from the air as it grows and incorporates this carbon in its structure. When the tree falls and decays in the forest, or is processed into firewood and burned, the carbon is released again to the atmosphere. This cycle can be repeated forever without increasing atmospheric carbon. Heating with wood, therefore, does not contribute to the greenhouse effect. Moreover, when wood energy displaces the use of fossil fuels, the result is a net reduction in greenhouse gas emissions.
Wood heating and the forest
If the destruction of tropical rain forests causes global warming and if planting trees in Canada is a good strategy to control greenhouse gas concentrations, then how can using wood for home heating be justified? Good question. The answer lies in the natural cycle of growth, maturity, decay and re-growth of trees and forests. A healthy forest is not a museum, but a living community of plants and animals. When trees are used for energy, a part of the forest’s carbon “bank” is diverted from the natural decay and forest fire cycle into our homes to heat them.
The key to ecologically sound and sustainable wood energy is to ensure that the forest remains healthy, maintains a stable level of variously aged trees and provides a good habitat for a diversity of other species, both plants and animals. You can do your part by insisting on firewood that is harvested using sustainable forestry practices. Ask your fuel wood supplier about the origins of the firewood and make it clear that you are concerned about the sustainability of our forest resources. And finally, don’t demand a load of perfectly uniform pieces; there are better uses for long, straight logs than burning them.
It’s natural, it’s renewable.
Heck, it grows on trees!
Getting the most from your firewood
One of the great things about wood heating is that you are in control. There are steps you can take to conserve fuel and produce less smoke. For example, by buying your firewood early in the season and storing it under cover to dry for the summer, you’ll get more heat for every dollar you spend. Also, make sure the wood is sized correctly for your stove, fireplace or furnace – both the length and diameter influence the quality of burn and ease of use. If you have access to them, burn softer woods like poplar, aspen and birch in the fall and spring and save the more valuable fuels like maple and oak for the coldest part of the winter. If your woodburning appliance is more than ten years old, you might want to take a look at the new generation of wood heaters. The stoves and fireplaces that are certified as having low smoke emissions (usually by EPA; ask your dealer) are also about 25% more efficient than the older models. By choosing your firewood carefully, by storing it to dry properly, and by burning it in an up-to-date stove or fireplace, you can reduce by about half the amount of wood needed to heat your house. And you’ll be doing the environment a favor at the same time.
By far the most important characteristic of any firewood is its moisture content. Firewood with a moisture content higher than twenty percent will burn, but it will be hard to light and keep burning and will make a lot of smoke. Plus much of its energy content will be wasted right up the chimney. Firewood should be between 15 and 20 percent moisture to burn properly and to get that dry it must be split and stacked in the open for at least a full summer.
Lots of people have been mislead by old timers who say that white ash (for example) can be burned green. Sure it will burn, but very badly because it has a natural moisture content of over 30 percent. While that is lower than most species, it is still much too wet for efficient burning. Some advice from old timers is helpful, but not in this case.
What is the best tree species for firewood? While there is always room for debate, we like to suggest that the best species in your area is the one that is most plentiful, easy to split and doesn’t cover your hands and clothes with sticky sap.
All wood, regardless of species, has about the same energy content per pound. The different species vary only in density. Traditionally, the favored trees in central North America were oak and maple because they are very dense and produce long-lasting coals. But these are valuable trees and in many areas are not plentiful enough to burn. No problem, just use softer woods like birch or poplar (aspen) or any other tree that is readily available. Keep in mind that people living in the coldest areas of North America have no hardwoods to burn and they get along just fine. Ultimately, it is more important to have wood that is cut and split to the right size and properly dried than it is to get the hardest wood available.
Above & Beyond Tree Service provides its customers with the highest quality hardwood from locally removed trees. We have available PREMIUM, HIGH QUALITY, SEASONED and SEMI-SEASONED hardwood that will surely exceed your expectations.
Above & Beyond Tree Service provides its customers with the highest quality hardwood from locally removed trees. Please call for pricing, as we sell various types of product depending on your needs.
Above and Beyond Tree Service was established in 2005 by Geoff Mongeon. Geoff is a licensed arborist, who owns and operates the business based in Lincoln, RI. Geoff has been involved in tree work for over 17 years and is educated and proficient in all phases of tree care. In addition, Geoff graduated from Bryant University with an Accounting degree and worked for several years as a business professional. He has a great understanding of customer service and fully utilizes his professional talents within his tree service.
Above & Beyond serves Cumberland, Lincoln, Smithfield, North Smithfield, Greenville, Pawtucket, Woonsocket and its surroundings neighbors in RI. Here is a list of our Products and Services (click on each to see images or videos of our services)
- Tree Removal & Pruning
- Stump Grinding
- Bracing & Cabling
- Ornamental Shrub Maintenance
- General Landscaping
- Brush Chipping
To contact Above & Beyond
PO Box 459, Lincoln, RI 02865